Home Products Online Help About Us Contact Us
Home > Products > Material > Instant PET Card
Products
Products
Instant PET Card
White  Golden  Silver

 Instant PET Card:
 
Printing method: Inkjet printer (Epson R210 or R230 is recommended)
                           Laser printer (Epson C900 or C1100 is recommended)
  Laminating type: pouch laminating
  Color: White, Golden or Silver
  Thickness: two printable PET sheet, each one is 0.15mm
                   Core sheet 0.46mm
  Size: 200x300mm or as per your requirement, or in roll type

1.Small production

Steps:
 
1. Design in computer, you may use CorelDraw, Photoshop, Illustrator, Freehand, etc. software to make

  design in your computer
  2. Put the blank printable overlay/film into the laser or inkjet printer (Epson C1100 laser printer or R210

  inkjet printer is recommended), reverse-print (Note: when you put the printable overlay/film into the inkjet

  printer, please put right side for print, DON’T PUT WRONG SIDE!) Please print one side on PET film A,

  and print the other side on PET film a. (same for B with b, C with c, D with d)
  3. After printing, let the printed film dry around 5-10 minutes, then, remove the protection film from the

  both sides of the core PVC sheet, put one printed film on one side of the PVC sheet and put the other

  printed film onto the other side of the PVC sheet, then, put them all into the pouch laminator for

  lamination. You may set the temperature around 160C, to get a better laminating result, you may

  laminate twice.
  4. After laminating, use a cutter to cut the laminated sheet into two half sheets (two pieces of sheet with

  size of 100x300mm)
  5. Put the sheet into manual puncher for punching
  6. After punching, you will get a final cards.

2.Small-medium production

Copyright (c) 2008 Shanghai DC. All rights reserved.  
MSN   shdcleon@hotmail.com
skype   Skype:leonkinn